Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-154
Samsung Business Communications
[506] TONE CADENCE
Provides the ability to customize the tone cadence on a system-wide basis. The system pro-
vides 11 types of tone and three types of tone provided from Central Office or a PBX sys-
tem can be detected.
When changing the MMC [506]
MMC [506] should not be changed from the default levels without the assistance
of the local SAMSUNG distributor.
No Item Description
00 BUSY TONE The called station is busy.
01 CONFM/BARGE A feature has been successfully activated/cleared or a Barge-In with
Tone has been performed.
02 DIAL TONE The system is ready to interpret key presses/dialled digits.
03 DND/NO MORE The called station is in DND or has no free CALL buttons.
04 ERROR TONE An error has been made.
05 HOLD/CAMPON This is the system generated hold tone.
06 MSGWAT TONE This is the tone heard at an SLT with a message waiting.
07 RGBACK TONE The called station is ringing.
08 RING TONE This is the tone heard from a ROP device or Loud Bell when these de-
vices are called.
09 TRANSFER
TONE
This is the tone heard when the transfer button is pressed or an SLT
hook flashes.
10 DID RNGBACK This is the tone heard by the outside party when they dial a DID number.
11 CO BUSY This is used to detect the busy tone provided from Central Office or a PBX
system.
12 CO RINGBACK This is used to detect the ring back tone provided from Central Office or
PBX system.
13 CO DIAL This is used to detect the dial tone provided from Central Office or PBX
system.
DEFAULT DATA
(unit: milliseconds)
TONE ON OFF ON OFF
BUSY TONE 500 500 500 500
CONFIRM/BARGE-IN 200 200 200 5000
DIAL TONE CONTINUOUS