Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-173
[603] ASSIGN TRUNK GROUP
Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is
useful in the programming of LCR when more than one trunk is to be in several dialling
plans. There are two different modes of operation: (1) sequential and (2) distribute. There
are 30 programmable trunk groups with up to 60 members per group.
Trunk group
One trunk can appear in more than one trunk group. If necessary, delete the trunk
member from other groups to prevent accidental access.
DEFAULT DATA
ALL LOOP/ISDN TRUNKS: 9
ALL TIE TRUNKS: 801
ALL VOIP NETWORKING TRUNKS: 803
ALL VOIP H.323 TRUNKS: 804
ALL VOIP SIP TRUNKS: 805
ACTION DISPLAY
1) Press Transfer button and enter 603.
Display shows:
[9] TRK GROUP
MODE:SEQUENTIAL
2) Enter valid trunk group.(e.g., 9)
OR
[9] TRK GROUP
MODE:SEQUENTIAL
Press Volume button to make selection and press
Right Soft button to advance cursor.
3) Press Right Soft button to change mode.
OR
[9] TRK GROUP
MEMBER 01:NONE
Press Volume button to change mode to member.
4) Press Right Soft button to move cursor to number
of member and enter valid member number
[9] TRK GROUP
MEMBER 05:NONE
(e.g., 05) via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.