Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-4
Samsung Business Communications
[101] CHANGE USER PASSCODE
Allows the system administrator or technician to reset any phone’s passcode to its default
value of ‘1234’. This MMC cannot display station passcodes; it can only reset them to de-
fault.
Phone users can set or change their individual passcodes. The passcode is used to lock or
unlock the phone for toll restriction(call barring) override and to access the DISA feature.
CONDITIONS
y The passcode of a station performing Operator Level Programming or Technician
Level Programming cannot be changed while the program mode is ‘ENABLE’.
y An Operator or Technician Level can only delete the passcode of a station and reset the
passcode to the default value, ‘1234’, not permitting to know the passcode.
Default passcodes
Default passcodes cannot be used for toll restriction override or for DISA access.
DEFAULT DATA
ALL STATION PASSCODES: 1234
ACTION DISPLAY
1) Press Transfer button and enter 101.
Display shows:
[201] PASSCODE
PASSCODE:****
2) Dial phone number.(e.g., 205)
OR
[205] PASSCODE
PASSCODE:****
Use Volume button to scroll through phone numbers
and press Right Soft button to move the cursor right.
3) Press Hold button to reset passcode. [205] PASSCODE
PASSCODE:1234
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next MMC.
RELATED ITEMS
MMC 100 STATION LOCK