Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-118
Samsung Business Communications
[419] BRI OPTIONS
Assigns several options on a per-BRI basis. There are different options depending on
whether the BRI is programmed as a trunk or station in MMC 423.
OPTIONS FOR BRI PORTS PROGRAMMED AS TRUNKS
No Option Description
0 CHANNEL ANY When this option is set to YES, the system will place calls on any free
channel of that BRI if the channel chosen by the user is busy. If set to
NO, they will receive a busy signal if they attempt to access a busy
channel even if the other channel on that BRI is free.
BRI MODE BRI access mode select.
P-P NOR Point to Point NORmal. This operates like a standard telephone line with
one CO number per channel and ring according to MMC 406.
P-P DID Point to Point Direct Inward Dial. This operates in a similar manner to an
analogue DID circuit with multiple CO numbers pointed to a single
channel and translated within the system(MMC714) to a single device.
P-M NOR Point to Multi-point NORmal. This type of circuit operates in a similar
manner to P-P NORmal but allows multiple devices to be attached to the
circuit. Ringing is defined in MMC 406.
1
P-M MSN Point to Multi-point MSN. This setting is used when the line uses the
MSN supplementary service. Ringing is defined in MMC 421.
DLSEND BRI dial sending mode select.
ENBLOCK Digits will be collected and sent in a single block similar to a Cellphone.
2
OVERLAP Digits will be sent as they are dialled by the user.
3 CLIP TABLE Used to select the Calling Party Number to send to the network. If
NONE, MMC405 TRUNK CO TEL NUMBER is sent to the network; oth-
erwise, the Calling Party Number entry in MMC 323 corresponding with
the selected number is sent to the network.
NB TYPE Used to select the type of the Calling Party Number to send to the net-
work.
UNKNOWN Unknown number
INT.NAT International number
NATIONAL National number
NETWORK Network specific number
SUBSCRIB Subscriber number
EXTEN Local number
4
ABBREV Abbreviated number