Filter
Top Products
OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-117
[418] BRI AND PRI CARD RESTART
This MMC is used to restart a BRI or PRI card at the card level. This action is required to
update the processor on the BRI or PRI card with any changes in the card setup MMCs and
to put these changes into effect.
CONDITIONS
y A BRI card or TEPRI card or TEPRI2 card must be installed in the system.
y Before setting the PRI program, the J2 jumper of the TEPRI or TEPRI2 card must be
set ON to PRI mode.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 418.
Display shows first BRI or PRI circuit:
[725] RESTART
CARD RESTART?NO
2) Dial first trunk on a BRI or PRI card.(e.g., 733)
OR
[733] RESTART
CARD RESTART?NO
Press Volume button to select the first trunk
and press Right Soft button to move the cursor.
3) Dial 1 for YES or 0 for NO.
Pressing 1 will advance to step 4.
[733] RESTART
CARD RESTART?YES
4) Dial 1 for YES or 0 for NO.
Pressing 1 or 0 will return to step 2.
[733] RESTART
ARE YOU SURE?YES
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 419 BRI OPTIONS
MMC 420 PRI OPTIONS
MMC 423 S/T MODE
MMC 424 BRI S0 MAPPING