Filter
Top Products
CHAPTER 2. Ошибка! Стиль не определен.
2-98
Samsung Business Communications
[400] CUSTOMER ON/OFF PER TRUNK
Assigns several options(listed below) on a per-trunk basis.
No Option Default Description
0 1A2 EMULATION OFF When this option is set to ON up to 4 internal stations
can participate in a conversation on this trunk by press-
ing the trunk key.
1 TRUNK INC DND OFF When this option is set to ON a trunk that is pro-
grammed to ring a specific station(a private line or DIL)
will ring at that station if the station is in DND.
2 TRUNK FORWARD ON When this option is set to OFF this trunk will not follow a
ringing stations call forwarding.
3 LCR ALLOW OFF Allows LCR to be switched ON/OFF when a trunk is
accessed using a DT key or by dialling its port number
(e.g., 701).
6 EFWD EXT CLI ON This option determines what kinds of CLI number will be
sent to the external forwarded outgoing call.(Station or
Received CLI from Trunk)
7 REPEAT CLI ON This option determines what kinds of CLI number will be
sent to the trunk to trunk call.(Trunk or Received CLI
from Trunk)
8 TONECHK DISC OFF When this option is set to ON, loop trunk can be discon-
nected by detecting busy tone.(To use this feature, the
LP TRK TONE DISC option in MMC 861 must be set to
ENABLE.)
9 AUTO ANSWER OFF When this option is set to ON, Auto Answer mode can
be assigned on a per-trunk basis.
10 COLORRING AS OFF When this options is set to ON, coloring service can be
used by svmi message.
DEFAULT DATA
1A2 EMULATE: OFF
TRK INC. DND: OFF
TRK FORWARD: ON
EFWD EXT CLI: ON
REPEAT CLI: ON
TONECHK DISC: OFF
AUTO ANSWER: OFF
COLORRING AS: OFF