Filter
Top Products
Part No. 1104849 99 3G Storm Series
®
Wheelchairs
Two (2) Top
Mounting Screws
FIGURE 14 - INSTALLING/REMOVING FENDERS -
HEAVY DUTY GEARLESS/BRUSHLESS MOTORS
Suspension
Arm
Gearless/Brushless
Fender Bracket
Fender
Spacer
Pan Head
Tap Screws
Fender
HEAVY DUTY GEARLESS/BRUSHLESS MOTORS (FIGURE 14)
Installing.
1. Remove the rim and tire from the heavy duty gearless/brushless motor. Refer to
REMOVING/INSTALLING THE RIM AND/OR TIRE in this section of the manual.
2. Remove two (2) top mounting screws and flat washers (not shown) that secure the
gearless/brushless motor to the suspension arm. Discard flat washers.
3. Secure the fender bracket to the suspension arm, in the orientation shown, using the
two (2) mounting screws removed in STEP 2. Torque mounting screws to 160 in-lbs.
4. Secure the fender and spacer to the fender bracket, in the orientation shown, with the
two (2) pan head tap screws provided. Securely tighten.
5. Reinstall rim and tire to the gearless/brushless motor. Refer to REMOVING/
INSTALLING THE RIM AND/OR TIRE in this section of the manual.
Removing.
1. Remove the rim and tire from the heavy duty gearless/brushless motor. Refer to
REMOVING/INSTALLING THE RIM AND/OR TIRE in this section of the manual.
2. Remove two (2) top mounting screws that secure the fender bracket and gearless/
brushless motor to the suspension arm.
3. Remove the fender bracket.
4. Secure the gearless/brushless motor to the suspension arm with two (2) flat washers and
two (2) existing mounting screws. Torque
mounting screws to 160 in-lbs.
5. Reinstall rim and tire to the gearless/
brushless motor. Refer to REMOVING/
INSTALLING THE RIM AND/
OR TIRE in this section of
the manual.
SECTION 12WHEELS/MOTORS
WHEELS/MOTORS