Filter
Top Products
3G Storm Series
®
Wheelchairs 52 Part No. 1104849
BACK FRAME
SECTION 8
WARNING
Always wear your seat positioning
strap.
3. Position the seat positioning strap and
quick release pin under the CJ back
bracket.
4. Secure the quick release pin, seat
positioning strap, and CJ back bracket
to the seat frame. Torque to 75 in-lbs.
5. Install washers and locknuts onto the
threaded studs of the CJ back bracket.
Torque to 75 in-lbs.
6. For replacing CJ back brackets only,
perform the instructions outlined in
PREPARATION FOR REMOVING/
INSTALLING SEAT FRAME
(STANDARD FRAME, ADJUSTABLE
FRAME, AND VAN SEAT) in
SECTION 6 of this manual.
Mounting
Screw
Locknut
Quick
Release
Pin
Back
Angle
Plate
Seat Frame
Washers
Locknuts
CJ Back
Bracket
Seat
Positioning
Strap
FIGURE 1 - REMOVING/
INSTALLING CJ BACK BRACKETS
Toward Front of
Wheelchair
CJ Bracket
mounts in Front
Holes on Back
Angle Plates.
DETAIL “A”
Threaded
Studs
Seat
Pan
BACK FRAME