Filter
Top Products
3G Storm Series
®
Wheelchairs 26 Part No. 1104849
UPHOLSTERY/POSITIONING STRAPSECTION 5
UPHOLESTERY/
POSITIONING STRAP
This Section Includes the Following:
Replacing Van Seat Positioning Strap
Replacing Back Upholstery
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that
all attaching hardware is tightened securely - otherwise injury or damage
may result.
REPLACING VAN SEAT POSITIONING STRAP
(FIGURE 1)
1. Remove the van style seat from the van seat frame. Refer to INSTALLING/REMOVING
VAN SEAT ASSEMBLY in SECTION 6 of this manual.
2. Remove the two (2) rear mounting screws, washers, and locknuts that secure the
seat positioning straps to the van seat frame.
NOTE: The washer is positioned between the seat positioning strap and the mounting screw.
3. Secure the NEW seat positioning strap halves with the mounting screws, washers
and locknuts to the van seat frame and torque to 75 in-lbs.
4. Reinstall the van style seat to the van seat frame. Refer to INSTALLING/REMOVING
VAN SEAT ASSEMBLY in SECTION 6 of this manual.
FIGURE 1 - REPLACING VAN SEAT POSITIONING STRAP
Van Seat Frame
Seat Positioning
Strap
Locknuts
Washer
FRONT OF
SEAT FRAME
REAR OF SEAT
FRAME
Mounting
Screw