Filter
Top Products
3G Storm Series
®
Wheelchairs 72 Part No. 1104849
Installing.
1. Place the wheelchair in a well ventilated area where work can be performed without
risking damage to carpeting or floor covering.
2. Verify the joystick ON/OFF switch is in the OFF position.
3. Secure the battery box carrying strap to the lid of the two (2) connector battery box.
4. Place two (2) connector battery box onto the battery sub-frame assembly with guide
pins facing the inside of the wheelchair.
5. Slide the two (2) connector battery box along the sub-frame until its guide pins are
engaged in the sub-frame connector.
NOTE: Visually inspect to ensure the connection is properly made. Connectors MUST be fully engaged.
NOTE: Make certain that the battery box carrying strap is positioned on top of the battery box
and will not interfere with the one (1) battery box guide pins when engaging the connector on
the one (1) battery box lid.
6. Secure the battery box carrying strap to the lid of the one (1) connector battery box.
7. Place one (1) connector battery box onto battery sub-frame.
8. Slide one (1) connector battery box along the sub-frame until its guide pins are
engaged in the connector of the two (2) connector battery box.
NOTE: Visually inspect to ensure the connection is properly made. Connectors MUST be fully engaged.
9. Place the battery retainer assembly on head portion of the mounting screws that
secure the shocks to the base frame.
CAUTION
The battery retainer assembly MUST be locked securely to hold the
battery boxes firmly in place or battery box connectors may be damaged
causing erratic wheelchair operation.
10. Rotate the levers of the battery retainer assembly to the locked position.
FIGURE 8 - REMOVING/INSTALLING BATTERY BOXES - GROUP 24
BATTERY BOXES FOR WHEELCHAIRS WITHOUT VENT TRAY
REAR OF
BASE FRAME
Locked
Position
Unlocked
Position
FRONT OF
BASE FRAME
Battery Retainer
Assembly
Levers
BATTERIESSECTION 9
BATTERIES