Filter
Top Products
Part No. 1104849 41 3G Storm Series
®
Wheelchairs
CONVERTING FROM STANDARD SEAT FRAME TO
ASBA OR VICE VERSA
1. Perform the instructions outlined in PREPARATION FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD FRAME, ADJUSTABLE FRAME, AND VAN SEAT) in this
section of the manual.
2. Perform one (1) of the following:
A. Remove the existing standard seat frame subassembly. Refer to
REMOVING/
INSTALLING STANDARD SEAT FRAME SUBASSEMBLY in this section of the
manual.
B. Remove the ASBA subassembly. Refer to REMOVING/INSTALLING ASBA
SUBASSEMBLY AND/OR COMPONENT REPLACEMENT in this section of the
manual.
3. Perform one (1) of the following:
A. Install the standard frame subassembly. Refer to INSTALLING/REMOVING
STANDARD SEAT FRAME SUBASSEMBLY in this section of the manual.
B. Install the ASBA subassembly. Refer to INSTALLING/REMOVING ASBA
SUBASSEMBLY AND/OR COMPONENT REPLACEMENT in this section of the
manual.
4. ASBA ONLY: Adjust side frame to desired seat width.
Refer to CHANGING SEAT WIDTH in this section of the manual for mounting hole
locations and allowable seat width/seat depth combinations.
5. STANDARD AND ASBA WITH 12 TO 15-INCH SEAT DEPTHS ONLY:
Remove the CJ back brackets from the existing standard seat frame and install onto the
NEW standard seat frame. Refer to REMOVING/INSTALLING CJ BACK BRACKETS
in SECTION 8 of this manual.
6. Perform the instructions outlined in PREPARATION FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD FRAME, ADJUSTABLE FRAME, AND VAN SEAT) in this
section of the manual.
4. Replace the van seat or the seat frame.
5. Secure new/existing van seat to the new/existing van seat frame with existing four (4)
mounting screws and spacers. Torque to 75 in-lbs.
6. Install new van seat assembly onto the wheelchair. Refer to INSTALLING/
REMOVING VAN SEAT ASSEMBLY in this section of the manual.
SECTION 6SEAT FRAME
SEAT FRAME