Filter
Top Products
Part No. 1104849 61 3G Storm Series
®
Wheelchairs
P
5. Verify battery cable clamps(s) are correctly installed and securely tightened.
6. Reposition battery clamp covers over battery post(s).
7. Install the battery box top(s).
8. Install the battery box(es) into the wheelchair. Refer to
REMOVING/INSTALLING
BATTERY BOXES in this section of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE using, otherwise the life of the
battery(ies) will be reduced.
9. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in this section of
the manual.
FIGURE 4 - DISCONNECTING/CONNECTING BATTERY CABLE(S) -
GROUP 24 BATTERIES
ONE (1) CONNECTOR
BATTERY BOX
BLACK
Battery
Clamp
Cover
RED
Battery
Clamp
Cover
Red POSITIVE (+)
Battery Cable
Clamp
Black NEGATIVE
(-)
Battery Cable
Clamp
Black NEGATIVE
(-)
Battery Cable
RED POSITIVE
(+)
Battery
Cable
One (1) Connector
Battery Box Top
Battery
Box
Bottom
NEGATIVE (-)
Battery
Terminal/Post
POSITIVE (+)
Battery
Terminal/Post
BLACK
Battery
Clamp
Cover
TWO (2) CONNECTOR
BATTERY BOX
RED
Battery
Clamp
Cover
RED
POSITIVE
(+) Battery
Cable
Clamp
Black
NEGATIVE (-)
Battery
Cable
Clamp
RED POSITIVE (+)
Battery Cable
BLACK
NEGATIVE (-)
Battery
Cable
Two (2)
Connector
Battery
Box Top
Battery Box
Bottom
NEGATIVE (-)
Battery Terminal/
Post
POSITIVE (+)
Battery Terminal/Post
Battery Box Bottom
POSITIVE (+)
Battery
Terminal/Post
NEGATIVE (-)
Battery
Terminal/Post
Battery
N
BATTERIES
BATTERIES
SECTION 9