Part No. 1104849 83 3G Storm Series
®
Wheelchairs
WHEELS/MOTORS
This Section Includes the Following:
Replacing Pneumatic Tires/Tubes - Drive Wheels/Casters
Removing/Installing Drive Wheels
Removing/Installing Drive Wheel Hub
Removing/Installing GB Motor Spacer
Removing/Installing Adapter Plate with Studs
Installing Wheel Lock Bracket onto Wheelchair
Removing/Installing the Rim and/or Tire
Removing/Installing Casters
Replacing Forks
Removing/Installing the Motor
Installing/Removing Fenders
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely - otherwise injury or damage
may result.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically
for cracks and wear and should be replaced.
REPLACING PNEUMATIC TIRES/TUBES - DRIVE WHEELS/
CASTERS
WARNING
DO NOT use your wheelchair unless it has the proper tire pressure
(p.s.i.). DO NOT overinflate the tires. Failure to follow these suggestions
may cause the tire to explode and cause bodily harm.
If tires are pneumatic, replacement of tire or tube MUST be performed
by an authorized Invacare dealer or qualified technician.
NOTE: If drive wheels or casters are pneumatic, under-inflation causes excessive wear which
results in poor performance of the tires.
REMOVING/INSTALLING DRIVE WHEELS (FIGURE 1)
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
Perform the following SECTION in a designated work area to prevent
damage to flooring (carpeting, tile, etc.).
SECTION 12
WHEELS/MOTORS