Filter
Top Products
3G Storm Series
®
Wheelchairs 34 Part No. 1104849
SEAT FRAMESECTION 6
SEAT FRAME
E. Remove the four (4) mounting screws that secure the EXISTING center frame to
support brackets.
F. Remove existing center frame from seat mount plates.
G. Secure NEW center frame to support brackets with the existing four (4) mounting
screws and locknuts. Torque to 156 in-lbs.
H. Secure NEW side frame to the center frame at the position noted previously.
Torque to 75 in-lbs.
NOTE: If seat width adjustment is also desired, refer to CHANGING SEAT WIDTH in this
section of the manual for mounting hole locations and allowable seat width/seat depth
combinations.
FIGURE 3- CHANGING SEAT DEPTH - ASBA
Side Frame
Side
Frame
Center
Frame
Mounting Screws
(Torque to
75 in-lbs)
Coved
Washers
Spacers
Locknuts
Mounting Screws
(Torque to
156 in-lbs)
Support
Brackets