Filter
Top Products
3G Storm Series
®
Wheelchairs 120 Part No. 1104849
Mounting
Screws
Battery Box
Sub-frame
Base Frame
Shock
FRONT OF CHAIR
REAR OF CHAIR
Retainer Bar
Retainer Clip
Spacer
2. Perform one (1) of the following:
A. WHEELCHAIRS EQUIPPED WITH VENT TRAY - Reinstall the four (4) mounting
screws that secure the shocks, retainer bar, spacers and retainer clips to the base
frame. Use Loctite 242 and torque mounting screws to 160 in-lbs.
B. WHEELCHAIRS WITHOUT VENT TRAY - Reinstall the four (4) mounting
screws that secure the shocks and spacers to the base frame.
3. Reinstall the battery boxes. Refer to REMOVING/INSTALLING BATTERY BOXES in
SECTION 9 of this manual. Use Loctite 242 and torque mounting screws to 160 in-lbs.
FIGURE 1 - REMOVING/INSTALLING GROUP 24
BATTERY BOX SUB-FRAME
WHEELCHAIRS EQUIPPED
WITHOUT VENT TRAY
WHEELCHAIRS EQUIPPED WITH
VENT TRAY
RWD WHEELCHAIRS
SECTION 15 RWD WHEELCHAIRS
Mounting
Screws
Wiring Harness
w/Bracket
Sub-Frame
Locknuts
REAR OF
CHAIR
FRONT OF
CHAIR
Spacer
Battery Box
Sub-frame
REAR OF CHAIR
FRONT OF CHAIR
Mounting Screws
Base Frame
Spacer
Shock