Filter
Top Products
3G Storm Series
®
Wheelchairs 42 Part No. 1104849
SECTION 6 SEAT FRAME
SEAT FRAME
CONVERTING FROM ASBA TO VAN SEAT OR VICE
VERSA
1. Perform the instructions outlined in PREPARATION FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD FRAME, ADJUSTABLE FRAME, AND VAN SEAT) in this
section of the manual.
2. Perform one (1) of the following:
A. Remove the ASBA subassembly. Refer to
REMOVING/INSTALLING STANDARD
SEAT FRAME SUBASSEMBLY in this section of the manual.
B. Remove the van seat Assembly. Refer to
INSTALLING/REMOVING VAN SEAT
ASSEMBLY in this section of the manual.
3. Perform one (1) of the following sections:
ASBAASBA
ASBAASBA
ASBA
A. Install the ASBA subassembly. Refer to INSTALLING/REMOVING ASBA SUBAS-
SEMBLY AND/OR COMPONENT
REPLACEMENT in this section of the manual.
B. Adjust side frames to desired seat width. Refer to CHANGING SEAT WIDTH in
this section of the manual for mounting hole locations and allowable seat width/
seat depth combinations.
C. 12 TO 15-INCH SEAT DEPTHS ONLY: Install the CJ back brackets, seat
positioning strap, and quick release pin from the onto the ASBA. Refer to RE-
MOVING/INSTALLING CJ BACK BRACKETS in SECTION 8 of this manual.
D. Perform the instructions outlined in PREPARATION FOR REMOVING/INSTALLING
SEAT FRAME (STANDARD FRAME, ADJUSTABLE FRAME, AND VAN SEAT) in this
section of the manual.
Van Seat
A. Install the van seat. Refer to INSTALLING/REMOVING VAN SEAT ASSEMBLY in
this section of the manual.
B. Adjust the van seat to the desired position. Refer to ADJUSTING VAN SEAT in
SECTION 6 of the Owner’s Manual, part number 1104782 or 1123757.
C. Perform the instructions outlined in PREPARATION FOR REMOVING/
INSTALLING SEAT FRAME (STANDARD FRAME, ASBA, AND VAN SEAT) in
this section of the manual.