Filter
Top Products
3G Storm Series
®
Wheelchairs 126 Part No. 1104849
RWD WHEELCHAIRSSECTION 15
RWD WHEELCHAIRS
22NF BATTERIES (FIGURES 6 AND 7)
1. Remove the 22NF battery box. Refer to REMOVING/INSTALLING BATTERY
BOXES in SECTION 9 of this manual.
2. Remove the drive wheel from the wheel hub. Refer to REMOVING/INSTALLING
THE DRIVE WHEELS in SECTION 12 of this manual.
3. Remove the mounting screw that secures the top of the shock to the base frame.
(FIGURE 7)
4. For 3-inch anti-tip assemblies (FIGURE 6) - Remove the mounting screw, two
(2) short spacers, two (2) large washers and lcoknut that secure the shock to the
anti-tip bracket and suspension arm.
5. Remove the shock from the base frame.
6. Secure the top of the NEW shock to base frame. Apply Loctite 242 and torque to
160 in-lbs. (FIGURE 7).
BOTTOM OF SHOCK or RUBBER ELEMENT
5/16-18 x 3-1/2-inch
Hex Head Cap Screw
Short
Spacer
Large
Washer
Locknuts
Long
Spacer
Small
Washer
Anti-tip
Bracket
Shock or
Rubber Element
Suspension Arm
for Gearless/
Brushless Motors
Suspension Arm
for 4 Pole Motors
FIGURE 6 - SHOCK OR RUBBER ELEMENT REPLACEMENT - GROUP 24
BATTERIES OR 22NF BATTERIES
2-inch
Spacer
Washers
RUBBER ELEMENT
NOTE: Hardware
is mounted inside
of the anti-tip bracket