Filter
Top Products
vi
4. General Precautions
Always observe the following precautions. Incorrect handling could result in faults, injuries, or electric shocks,
etc.
(1) Transportation and installation
CAUTION
Correctly transport the product according to its weight.
Use servomotor's suspension bolts only to transport the servomotor.
Do not use suspension bolts of the servomotor on the machine to transport the machine.
Do not stack products above the indicated limit.
Do not hold cables, shaft or detector when transporting the servomotor.
Do not suspend or hold the controller or servo drive unit by the connected wires or cables when transporting.
Do not hold the front cover when transporting the controller or servo drive unit. The device could drop.
When installing, always observe the installation direction and install on a place which can withstand the
weight.
Do not get on the product, or place heavy objects on it.
Provide the specified distance between the controller, servo drive unit and inner surface of the control
panel and between other devices.
Do not install or operate a controller, servo drive unit or servomotor that is damaged or that has missing
parts.
Take care not to cut hands on the heat radiating fins or metal edges.
Do not block the intake/outtake ports of the servomotor with cooling fan.
Do not allow conductive foreign matter such as screws or metal chips or combustible foreign matter such
as oil enter the controller, servo drive unit or servomotor.
The controller, servo drive unit and servomotor are precision devices so do not drop or apply strong
impacts on them.
Do not install the controller operation board where it may be subject to cutting oil.