Filter
Top Products
4. NC Card (HR621/HR623/FCU6-HR655) Connection
4.5 PCI NC Card Mounting
27
4.5 PCI NC Card Mounting
4.5.1 Before Mounting the PCI NC Card
(1) Before mounting the PCI NC Card, confirm that the control section items below are present.
FCU6-HR655 unit (PCI bus-compatible NC Card): 1 pc.
FCU6-DX2**, DX3** or DX4** unit
(Base I/O unit: with aluminum die cast): 1 pc.
HR682 card (relay card: L-shaped PCB, with metal spacers): 1 pc.
CR2032 (Toshiba button battery): 1 pc.
F010 cable (half-pitch 50-pole shielded cable): 1 pc.
F011 cable (half-pitch 26-pole shielded cable): 1 pc.
(2) Insert a battery to the PCI NC Card as shown below.
+
-
+
-
+
-
PCI NC Card (HR183+655)
BAT
BAT
Battery holder
Insert in the direction
of the arrow.
Insert with the + polarity
facing upward, and
catch with the hook.
Press in vertically.
Check the battery's
polarity indicated on
the holder's metal
section before inserting.
Do not short-circuit, charge, overheat, incinerate or disassemble the battery.
Dispose of the spent battery according to local laws.
CAUTION