Filter
Top Products
Appendix 3 Parts for EMC Measures
Appendix 3.1 Shield Clamp Fitting
102
Appendix 3 Parts for EMC Measures
Appendix 3.1 Shield Clamp Fitting
The effect can be increased by directly connecting the cable's shield sheath to the grounding plate.
Install the grounding plate near the outlet (within 10cm) of each panel, and press against the grounding
plate with the clamp fitting. If the cables are thin, several can be bundled and clamped together.
To provide sufficient frame grounding, install the grounding plate directly on the cabinet or connect with
a grounding wire.
If the AERSBAN-SET, containing the grounding plate and clamp fitting, is required, please contact
Mitsubishi.
40
Peel the cable sheath
at the clamp section
Cable
Clamp fitting
(Fitting A, B)
Grounding plate
Shield sheath
Cable
Clamp section drawing
Outline drawing
MAX L
10
24
Unit: mm
Clamp fitting
Grounding plate
M4 screw
35
6
22
17.5
2-φ5 hole
Installation hole
Note 1
11
35
A
C
24
0
-0.2
6
3
7
B±0.3
30
+0.3
0
Note 1) Screw hole for wiring to cabinet’s grounding plate
Note 2) The grounding plate thickness is 1.6mm
A
(mm)
B
(mm)
C
(mm)
Enclosed fitting L (mm)
AERSBAN-DSET 100 86 30 Two clamp fittings A Clamp fitting A 70
AERSBAN-ESET 70 56 – One clamp fitting B Clamp fitting B 45