Filter
Top Products
A-119
INSTRUCTION SET REFERENCE
SETB bit51
Binary Mode Source Mode
Bytes: 22
States: 2† 2†
†If this instruction addresses a port (P
x
,
x
= 0–3), add 2 states.
Hex Code in: Binary Mode = [Encoding]
Source Mode = [Encoding]
Operation: SETB
(bit51) ← 1
SETB CY
Binary Mode Source Mode
Bytes: 11
States: 11
Hex Code in: Binary Mode = [Encoding]
Source Mode = [Encoding]
Operation: SETB
(CY) ← 1
SETB bit
Binary Mode Source Mode
Bytes: 43
States: 4† 3†
†If this instruction addresses a port (P
x
,
x
= 0–3), add 2 states.
[Encoding]
Hex Code in: Binary Mode = [A5][Encoding]
Source Mode = [Encoding]
Operation: SETB
(bit) ← 1
SJMP rel
Function: Short jump
Description: Program control branches unconditionally to the specified address. The branch destination
is computed by adding the signed displacement in the second instruction byte to the PC,
after incrementing the PC twice. Therefore, the range of destinations allowed is from 128
bytes preceding this instruction to 127 bytes following it.
[Encoding] 1 1 0 1 0 0 1 0 bit addr
[Encoding] 1 1 0 1 0 0 1 1
1 0 1 0 1 0 0 1 1 1 0 1 0 y y y direct addr