Filter
Top Products
Reference Manual
00809-0100-4665, Rev AA
August 2010
Rosemount 8732
www.rosemount.com
Appendix B Approval Information
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
Approved Manufacturing Locations . . . . . . . . . . . . . . . . . page B-1
European Directive Information . . . . . . . . . . . . . . . . . . . . page B-1
Sensor Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-5
PRODUCT
CERTIFICATIONS
Approved Manufacturing
Locations
Rosemount Inc. — Eden Prairie, Minnesota, USA
Fisher-Rosemount Technologias de Flujo, S.A. de C.V. —
Chihuahua Mexico
Emerson Process Management Flow — Ede, The Netherlands
Asia Flow Technologies Center — Nanjing, China
European Directive
Information
The EC declaration of conformity can be found on page B-1. The most recent
revision can be found at www.rosemount.com.
Type n protection type in accordance with EN50021
• The installation of external connections and the plugging of any unused
entries must be carried out using appropriate Ex e or Ex n cable glands
and blanking plugs, component certified by an approved Certification
Body.
CE Marking
Complies with EN 61326-1: 2006
For Rosemount 8732E transmitters:
Complies with Essential Health and Safety Requirements:
EN 60079-0: 2006
EN 60079-1: 2007
EN 60079-7: 2007
EN 60079-11: 2007
EN 60079-15: 2005
EN 61241-0: 2004
EN 61241-1: 2006
International Certificates
C-Tick Marking
Rosemount Inc. complies with the following IEC Requirements.