Filter
Top Products
Reference Manual
00809-0100-4665, Rev AA
August 2010
G-5
Rosemount 8732
142 FINGERPRINT_SELECT Components to re-fingerprint.
Note: This parameter needs to be configured
before the Refingerprint operation is started
via the
PERFORM_REFINGERPRINT_FLOWTUBE
parameter.
143 SENSOR_RANGE_LO Sensor range parameter used to calculate if
the PV value is falling outside the sensor
limits to generate diagnosis indication to Host.
144 SENSOR_RANGE_HI Sensor range parameter used to calculate if
the PV value is falling outside the sensor
limits to generate diagnosis indication to Host.
145 SENSOR_RANGE_GAP The gap in ft./s that need be the their between
the parameters SENSOR_RANGE_LO &
SENSOR_RANGE_HI.
146 PV_LOI_TIME Time in seconds for which the LOI should
show the value of volume flow. 0 indicates
that the volume flow shall not be displayed on
the LOI. If all the totalizer display timings are
also 0 then the LOI shall default to show the
volume flow value.
147 T1_LOI_TIME Time in seconds for which the LOI should
show the value of totalizer-1. 0 indicates that
the totalizer-1 value shall not be displayed on
the LOI.
148 T2_LOI_TIME Time in seconds for which the LOI should
show the value of totalizer-2. 0 indicates that
the totalizer-2 value shall not be displayed on
the LOI.
149 T3_LOI_TIME Time in seconds for which the LOI should
show the value of totalizer-3. 0 indicates that
the totalizer-3 value shall not be displayed on
the LOI.
150 VIEW_1_TB View object 1 of the transducer block.
Index Parameter Name Description