Filter
Top Products
Reference Manual
00809-0100-4665, Rev AA
August 2010
Rosemount 8732
H-2
MODULE RELATED
INFORMATION
DESCRIPTION OF
EXTENDED DP
FEATURES
DESCRIPTION OF
PHYSICAL INTERFACE
FOR ASYNC. AND SYNC.
TRANSMISSION
DESCRIPTION OF
DEVICE RELATED
DIAGNOSIS
Modular Station 1; 1: Modular Device
MaxModule 4 ;No. of(AI + Totalizer): 1-AI, 3-Totalizer
Max Input Len 20 ; Max Module x 5 Bytes - 5 * (1 AI + 3 TOT)
Max Output Len 6 ; No. of TOT x 2 Bytes - 2 * (3 TOT)
Max Data Len 6 ; Max_Input_Length + Max Output Length
Slave Family
12 ;Definition for Profibus PA
Profile(independent\;of used Physicsl layer)
Max Diag Data Len
20 ;6 bytes (Standard Diagnostics) + 1
Byte\;(Ext.Diag. Header) + 7 Bytes (Ext.
Diag.\;Std.) + 2 Bytes (Ext. Diag.
Manufacturer)
Ext User Prm Data Const(0) 3
Ext User Prm Data Const(0) 0x00, 0x00, 0x00
DPV1_Slave 1;Device conforms to DP-V1
C2 Read Write supp 1
C2 Max Data Len 128
C2 Read Write required 1
C2 Max Count Channels 1
Max Initiate PDU Length 52 ; 48(Data) + 4(Header)
C2 Response Timeout 4000
DPV1 Data Types 0
REVIEW Rosemount Device is PA device
Physical_Interface 0 ; RS-485 Standard Copper
Transmission Delay 45.45 0
Reaction Delay 45.4 0
Transmission Delay 93.75 0
Reaction Delay 93.75 0
End Physical Interface
Physical Interface 1 ; IEC61158-2 - MBP
Transmission Delay 31.25 0
Reaction Delay 31.25 0
End Physical Interface
Unit Diag Bit(16) Error appears
Unit Diag Bit(17) Error disappears
Unit Diag Bit(24) Hardware failure electronics
Unit Diag Bit(25) Hardware failure mechanics
Unit Diag Bit(26) Motor temperature too high
Unit Diag Bit(27) Electronic temperature too high
Unit Diag Bit(28) Memory error
Unit Diag Bit(29) Measurement failure
Unit Diag Bit(30) Device not initialized
Unit Diag Bit(31) Device initialization failed
Unit Diag Bit(32) Zero point error
Unit Diag Bit(33) Power supply failed