Filter
Top Products
Reference Manual
00809-0100-4665, Rev AA
August 2010
Rosemount 8732
3-8
Options for Flow Rate Units
Line Size The line size (sensor size) must be set to match the actual sensor connected
to the transmitter. The size must be specified in inches according to the
available sizes listed below. If a value is entered from a control system that
does not match one of these figures, the value will go to the next highest
option. This parameter is configured in the Transducer Block.
The line size (inches) options are as follows:
• ft/s • bbl/s (1 Barrel = 42 gallons)
• ft/m • bbl/min (1 Barrel = 42 gallons)
• ft/h • bbl/h (1 Barrel = 42 gallons)
•m/s • bbl/d (1 Barrel = 42gallons)
•m/h •cm
3
/s
• gal/s •cm
3
/min
•GPM •cm
3
/h
• gal/h •cm
3
/d
• gal/d •lb/s
•L/s •lb/min
•L/min •lb/h
•L/h •lb/d
•L/d •kg/s
•CFS •kg/min
•CFM •kg/h
•CFH •kg/d
•ft
3
/d • STon/s
•m
3
/s • STon/min
•m
3
/min • STon/h
•m
3
/h • STon/d
•m
3
/d • t/s
•IGAL/s • t/min
•IGAL/min • t/h
•IGAL/h • t/d
•IGAL/d • BBL/s (1 Barrel = 31 gallons)
• BBL/m (1 Barrel = 31 gallons)
• BBL/h (1 Barrel = 31 gallons)
• BBL/d (1 Barrel = 31 gallons)
0.1, 0.15, 0.25, 0.30, 0.50, 0.75, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10, 12, 14,
16, 18, 20, 24, 28, 30, 32, 36, 40, 42, 44, 48, 54, 56, 60, 64, 72, 80