Filter
Top Products
35
6. Assembly
Manual fixed micromanipulation stage
To install the attachable mechanical stage for
the manual fixed micromanipulation stage
(Fig. 24), proceed as you would for the attach-
able mechanical stage of the standard stage.
The insert frames (Fig. 20a to c) differ at this
point. These are held by two screws on the at-
tachable mechanical stage and changed by re-
leasing the screws.
Fig. 21
Inserts for fixed stages
Fig. 22
Glass insert for
3-plate cross-stage
and scanning stage
Fig. 23
Heater insert
Fig. 24 Installation of attachable mechanical stage
Fig. 25 Installation of attachable mechanical stage