Filter
Top Products
24
WARNING
DO NOT over tighten the locknut that secures
the locking lever to the bottom bracket. Over
tightening this locknut will prevent the locking
lever from operating properly, possibly caus-
ing injury.
7. Install the phillips bolt and tighten securely with the
locknut.
8. Install the T-arm onto the wheelchair. Refer to IN-
STALLING/REMOVING THE T-ARMS in this pro-
cedure of the manual.
A
R
M
S
PROCEDURE 2 ARMS
FIGURE 10 - REPLACING THE LOCKING LEVER
- T-ARM
Bottom
Bracket
Phillips Bolt
Locking
Lever
Spring
Extended Ends
Locknut
Notch