Filter
Top Products
Installation - 2
15
Edit
Copy Table
Copies highlighted information from the table to the Clipboard
Copy Graph
Copies the presently displayed graph to the Clipboard
View
Main
Lets you select the type of test to run
Test Setup >
Lets you select the test set-up parameters
Pre-test
Lets you run the pre-test
Test
Lets you run the test
Display >
Lets you view specific test results
Report >
Lets you view the test report
Options
Local Lockout
Lets you disable the front panel keys of the Agilent 6800-Series AC Power
Source/Analyzer.
Validation Mode
Lets you run a special mode used to validate current harmonics testing
methodology.
Configure...
Lets you specify the I/O slot address of the interface, the instrument address,
the interface type, and the Agilent 6800-Series AC Power Source/Analyzer
model number.
Defaults...
Lets you view and change the default values for line voltage, frequency, and
test standards.
Mains
Auto On/Auto Off
Automatically controls the output of the Agilent 6800-Series AC Power
Source/Analyzer while the test is running.
Auto On/Manual Off
Lets you manually turn off the output of the Agilent 6800-Series AC Power
Source/Analyzer from the Test window. Provides automatic turn-on at the
beginning of pretests and tests.
Manual On/Auto Off
Lets you manually turn on the output of the Agilent 6800-Series AC Power
Source/Analyzer from the Test window. Provides automatic turn-off at the
completion of pretests and tests.
Manual On/Manual Off
Lets you manually control the output of the Agilent 6800-Series AC Power
Source/Analyzer from the Test window.
Help
Contents
Accesses the Help contents.
Using Help
Explains how to use the on-line help.
About
Displays the Agilent 14761A HFTS software revision.
Mains ON/ Mains Off
Indicates the present state of the ac source output.