Filter
Top Products
3 - 44
3.4 Buffer Memory
3.4.10 Offset/gain setting mode (Un\G26,Un\G27)
3
SPECIFICATIONS
3.4.10 Offset/gain setting mode (Un\G26,Un\G27)
A channel targeted for adjusting offset/gain setting values in the offset/gain setting mode is
specified. (Refer to Section 4.6)
(1) Setting methods
Set a channel targeted for adjusting offset setting in Un\G26, and a channel for gain
setting in Un\G27.
Figure 3.29 Setting of Averaging processing selection (Un\G24,Un\G25)
(2) Default value
All channels are set to “Disable” (0000H).
POINT
Setting multiple channels at the same time is possible, however, set offset and
gain values separately (set “0” in either Un\G26 or Un\G27).
If both are set to the same channel, an error (error code500) occurs.
b7 b6 b5 b4 b3 b2 b1 b0
CH4 CH3 CH2 CH1CH8 CH7 CH6 CH5
CH4 CH3 CH2 CH1CH8 CH7 CH6 CH5
b15 b14 b13 b12 b11 b10 b9 b8
00000000
00000000
Un\G26
(Offset specification)
Un\G27
(Gain specification)
Data for b8 to b15 are fixed to "0". 1: Setting channel
0: disable