Filter
Top Products
2
SYSTEM CONFIGURATION
2.2 When Using the Q68TD-G-H02 (H01) with Redundant CPU
2 - 6
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND
PROCEDURES BEFORE
OPERATION
5
UTILITY PACKAGE (GX
CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
2.2 When Using the Q68TD-G-H02 (H01) with Redundant CPU
This section describes the use of the Q68TD-G-H02 (H01) with Redundant CPU.
(1) Dedicated instruction
The dedicated instruction cannnot be used.
(2) GX Configurator-TI
Configurator-TI cannot be used when accessing Redundant CPU via an intelligent
function module on an extension base unit from GX Developer. Connect a personal
computer with a communication path indicated below.
Figure 2.4 Communication path available for GX Configurator-TI
Main base unit
Extension base unit
12
1
Direct connection to use the CPU
2
Connection through an intelligent function module on the main base unit
(Through Ethernet module, MELSECNET/H module, or CC-Link module)
(GX Configurator-TI cannot be used.)