Filter
Top Products
6 - 17
6.3 Using Programs on Remote I/O Network
6.3.1 Before creating a program
6
PROGRAMMING
6.3.1 Before creating a program
(1) Wiring of external devices
Mount the Q68TD-G-H02 onto the base unit and connect a thermocouple K type to
CH1 to CH3.
For details, refer to Section 6.2.1.
(2) Intelligent function module switch setting
Based on the setting conditions given in Section 6.3 (2), make the intelligent function
module switch setting.
For setting details of each switch, refer to Section 6.2.1 (2).
Figure 6.18 Intelligent function module switch setting for the use of remote I/O network
Write the intelligent function module parameters to the remote I/O station.
POINT
For details on the MELSECNET/H remote I/O network, refer to the Q
Corresponding MELSECNET/H Network System Reference Manual (Remote I/O
Network).