Filter
Top Products
6
PROGRAMMING
6.2 Using Programs in Normal System Configuration
6.2.1 Before creating a program
6 - 6
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND
PROCEDURES BEFORE
OPERATION
5
UTILITY PACKAGE (GX
CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
2) Switch 3: Offset/gain setting
Figure 6.5 Intelligent function module switch setting: Offset/gain setting
3) Switch 4: Cold junction temperature compensation Yes/No setting, Mode
setting
Figure 6.6 Intelligent function module switch setting: Cold junction temperature compensation Yes/No setting, Mode setting
4) Switch 5: Use prohibited (Fixed to 0H
*1
)
Figure 6.7 Intelligent function module switch setting: Use prohibited
* 1 If any value other than 0H is set, an error occurs.
(b) Intelligent function module switch setting
Click the switch setting button on the "I/O assignment" tab of PLC parameter in
GX Developer to display the following screen, and make setting s for switch 1 to 5.
Figure 6.8 Intelligent function module switch setting in GX Developer
H
0000
CH1 to CH3: 0 (Factory default setting)
CH4 to CH8: 0 (Default value)
<Switch 3>
00000000
b7 b6 b5 b4 b3 b2 b1 b0
CH8CH7 CH6CH5CH4 CH3CH2CH1
Fixed
to 0
H
H
0000
<Switch 4>
Fixed at 0
All channels: 0
H (With cold
junction temperature compensation)
All channels: 0
H (Normal mode)
H
0000
<Switch 5>
Fixed at 0