Filter
Top Products
6 - 21
6.3 Using Programs on Remote I/O Network
6.3.2 Program example when GX Configurator-TI is used
6
PROGRAMMING
(4) Program example
Figure 6.22 Program example when GX Developer-TI is used in remote I/O network use
Reads measured
temperature values
of CH1 to CH3.
Resets Disconnection
detection signal (X100C).
Resets Error flag
(X100F).
Processing at CH1
disconnection detection
Processing when CH2
process alarm has occurred
Processing when CH3
rate alarm has occurred