Filter
Top Products
APPX - 13
Appendix 2 Dedicated Instruction
Appendix 2.4 G(P).OGSTOR
APPENDICES
(3) Program example
The following program is designed to read the offset/gain values of the Q68TD-G-
H02(H01) converter module mounted in the position of I/O number X/Y0 to X/YF when
M11 is turned ON.
Figure APPX.8 Program example
Dedicated instruction
(GP.OGSTOR)
Processing at the time of error completion
Setting control data
Restoring offset/gain setting values