Filter
Top Products
4
SETUP AND PROCEDURES BEFORE OPERATION
4.5 Switch Setting for Intelligent Function Module
4 - 11
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETUP AND
PROCEDURES BEFORE
OPERATION
5
UTILITY PACKAGE (GX
CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
(2) Operating procedure
Start the settings with GX Developer assignment setting screen.
(a) I/O assignment setting screen
Set the following for the slot in which the Q68TD-G-H02(H01) is mounted.
The type setting is required; set other items as needed.
Type : Select "intelli."
Model name : Enter the module model name.
Points : Select 16 points.
Start XY : Enter the start I/O number for the Q68TD-G-H02(H01).
Detail setting: Specify the control PLC for the Q68TD-G-H02(H01).
It is unnecessary to set the "Error time output mode" or "H/W error time PLC
operation mode" since these settings are invalid for the Q68TD-G-H02(H01).
Figure 4.7 I/O assignment tab
(b) Switch setting for intelligent function module screen
Click on [Switch setting] on the I/O assignment setting screen to display the
screen shown at left, then set switches 1 to 5.
The switches can easily be set if values are entered in hexadecimal. Change the
entry format to hexadecimal and then enter the values.
Figure 4.8 Switch setting for intelligent function module screen