Filter
Top Products
Questions? Refer to Page 10-13 For Customer Care Information.
8-25
Review/Change Test Setup for Security:
Refer to the beginning of the Review or Change Setup section for the
step-by-step instructions to access the appropriate setup menu.
If the monitor displays a message not indicated in these procedures,
please refer to section 10, Troubleshooting.
What You See
on the Display
What You Do Comments
1. Press 1 – Test Setup. The display shows the
Test Setup menu.
2. Press 4 – Security. The display shows the
Security QC Interval
menu.
3. The administrator will
select one of the
following options:
Press 1 – Next, to
continue to Security
Operator ID Not Certified
screen and skip forward to
step 10.
Press 2 – Change, to
change the QC Interval
Controls Expired option.
The display shows the
options for the QC
Interval Controls Expired
menu. The options are to
Allow Test, even if the
QC interval has expired;
Warn the operator that
even though the QC
interval has expired, the
test may continue; or
Lockout the system until
the required control tests
are performed.