Filter
Top Products
What You See
on the Display
What You Do Comments
8-10
6. Enter 1-99 hours or
1-99 days then press
Enter.
The All Tests Upload
Interval screen will be
displayed.
7. Press 1 to continue to
the All Tests Operator
ID screen.
The display shows the All
Tests Operator ID menu.
8. The administrator will
select one of the
following options:
Press 1 – Next, return to
the Test Setup menu.
Press 2 – Change.
The display shows the
Operator ID options.
9. The administrator will
select one of the
following options:
Press 1 – Disabled; skip
forward to step 13.
Press 2 – Optional.
Press 3 – Required.
If Disabled is selected, the
display will not prompt
for Operator ID. If
Optional or Required is
selected, the administrator
can enter a minimum and
maximum number of
digits, between 1-15
digits.
10. The administrator will
enter minimum and
maximum numbers
between 1-15.
Key in the minimum
number of digits for an
operator ID then press
Enter.
Key in the maximum
number of digits for an
operator ID then press
Enter.
The display shows the
Operator ID Barcode
options.