Filter
Top Products
8-20
Review/Change Test Setup for Control Tests:
Refer to the beginning of the Review or Change Setup section for step-
by-step instructions to access the appropriate setup menu.
If the monitor displays a message not indicated in these procedures,
please refer to section 10, Troubleshooting.
What You See
on the Display
What You Do Comments
1. Press 1 – Test Setup. The display shows the
Test Setup menu.
2. Press 3 – Control Test. The display shows the
Control Test Levels screen.
The monitor can be set to
perform any combination
of low, normal and high
control tests.
3. The administrator will
select one of the
following options:
Press 1 – Next, to review
Control Test Result; skip
forward to step 6.
Press 2 – Change, to
change Control Test
Levels option.
The display shows the
Control Test Levels
options.
4. The administrator will
select one or a
combination of the
following options:
Press 1 – Low, to activate
low control.
Press 2 – Normal, to
activate normal control.
Press 3 – High, to activate
high control.
Press 4 – to return to
Control Test Levels screen.
The activated control
level(s) are in bold type.