Filter
Top Products
What You See
on the Display
What You Do Comments
3-6
8. With the contact bars
facing up, insert the
test strip into the test
strip port until it stops.
The Apply Sample screen
will appear.
9. Apply a drop of blood
directly from the
patient’s finger or from
a syringe to the target
area on the test strip.
The monitor beeps when
the sample is accepted.
The Sample Accepted
screen will appear. For
detailed description of the
test strip target area, refer
to page 2-2.
The test starts
automatically, as the
sample is accepted.
10. Wait for the monitor
to analyze the sample
and display the test
result.
The monitor counts down
20 seconds, then displays
the test result.
11. Note the test result
and whether it falls
outside the action
range.
If the test result is above
or below the action range,
an up or down triangle
appears in front of the test
result.
(5.8 mmol/L)