Filter
Top Products
Questions? Refer to Page 10-13 For Customer Care Information.
8-11
What You See
on the Display
What You Do Comments
11. The administrator may
customize I2 of 5 by
pressing 1 if I2 of 5
is bolded (enabled).
Press 1 again to access
the Operator ID
Barcode screen.
Activated barcodes appear
in bold type. More than
one Barcode format can
be active at one time.
Any Barcode can be
deactivated by selecting
the corresponding number.
Note: Only Barcodes
1 and 2 can be
customized.
12. The administrator will
select one of the
following:
1. No Check Digit
2. USS Check Digit
3. OPCC Check Digit
The display returns to
the Operator ID Barcode
screen.
USS or OPCC will
appear after the format,
if selected.
13. The administrator may
customize Code 39 by
pressing 2 if Code 39
is bolded (enabled).
Press 2 again to access
the Operator ID
Barcode screen.
14. The administrator will
select one of the
following:
1. No Check Digit
2. Use Check Digit
The display shows the
Alphanumeric, Full ASCII
screen.
15. The administrator will
select one of the
following:
1. Alphanumeric
2. Full ASCII
The display returns to
the Operator ID Barcode
screen.
C will appear after the
format if Check Digit is
selected.
F will appear if Full
ASCII is selected.