Filter
Top Products
What You See
on the Display
What You Do Comments
3-8
13. The operator can
select one of the
following options:
Press 1 – Next Patient.
Press 2 – Repeat Test.
Press 3 – Patient History.
If 1 is selected, the Scan
Patient ID screen will
appear. Return to step 4
to continue with testing
on the next patient.
If 2 is selected, the Scan
or Enter Strip Lot screen
will appear. Return to step
5 to repeat the test.
If 3 is selected, the
monitor will display the
last test result for this
patient as well as allow
the operator to view
previous results.
Refer to the section
entitled Data Review for
Patient History for further
information.
(5.8 mmol/L)
Important: If the blood glucose result appears to be inconsistent (lower or
higher than expected), there may be a problem with the test strip. Repeat the
test using a new test strip. Results that are incorrect may have serious medical
consequences. Consult your healthcare professional before making any
changes to diabetes medication plans if:
• The blood glucose results are not consistent with the physical symptoms
AND you have ruled out common errors in technique.
• The blood glucose result is less than 50 mg/dL (2.8 mmol/L) or greater
than 300 mg/dL (16.7 mmol/L).