Filter
Top Products
11-2
Replacing the Batteries
Use the following procedure to install new batteries in the Precision
PCx Monitor. The Precision PCx Monitor requires two (2) AA alkaline
batteries or use the rechargeable battery pack which is available from
Abbott Laboratories, MediSense Products.
1. Turn the PCx Monitor off by pressing the On/Off button on the
keypad.
2. Turn the monitor over to view the battery compartment.
3. Press the tab on the battery compartment cover and lift the cover up.
4. Remove and discard the used batteries in compliance with your local
government regulations.
5. Insert the new batteries, using the + and - symbols in the battery
compartment to position the new batteries with the correct polarity.
6. Align the battery compartment cover with the slots on the Precision
PCx Monitor, then snap the cover into place.