Filter
Top Products
Moving Around the Review/Change Setup Menu
The Review and Change Setup menu options offer the same additional
sub-menus (as shown in the Precision PCx Menu Tree). The operators
may have to select additional options to access the desired change or
review option.
To access these sub-menus or options in both the Review and Change
Setup menus, the message 1-Next appears at the bottom of the display.
The operator presses 1 to move to the next option. The monitor also
allows the operator to go back to the previous option by pressing Clear.
The current status or selection for the option appears in bold type on the
display.
To change an option, the administrator must access the Change Setup
menu (this is password protected). In addition to the 1-Next message
that appears at the bottom of the option screen, there is the 2-Change
message. The administrator presses 2 to change the option. The active
selection for the option now appears in bold type.
When finished reviewing or changing the options, the operator or
administrator can press Menu once to return to the beginning of Menu
Mode or press Menu twice to go to Test Mode.
In this section the majority of the directions refer specifically to how to
change various settings. However, these same directions can be
followed as well for reviewing settings under its own menu option.
Differentiation is made between the password protected sections in the
Change Setup Menu Option, where only administrators can access the
screens, and the non-password protected sections in the Review Setup
Menu Option, where operators and administrators can access
the screens.
Questions? Refer to Page 10-13 For Customer Care Information.
8-3