Filter
Top Products
Questions? Refer to Page 10-13 For Customer Care Information.
4-3
7. With the contact bars
facing up, insert the test
strip into the test strip
port until it stops.
The monitor will prompt
the operator to apply the
desired control solution
to the test strip.
What You See
on the Display
What You Do Comments
5. Scan or manually
enter* the test strip lot
number via the keypad,
then press Enter.
After the test strip lot
number is entered, the
monitor will prompt for
a test strip to be inserted
into the test strip port.
6. Open the foil test strip
packet at the notch and
tear up or down to
remove the test strip.
* Manual entry of strip lots with alpha-numeric barcodes is not supported.
Precision PCx PlusTest Strip
with TrueMeasure Technology
For Use with Precision PCx
v2.2 Only
Precision PCx Test Strip
For Use with Precision PCx
v2.0, v2.1 and v2.2.