Filter
Top Products
Questions? Refer to Page 10-13 For Customer Care Information.
5-11
What You See
on the Display
What You Do Comments
Data Review for Patient History by Comment Code:
Please refer to page 5-2 of the Data Review section for the step-by-step
instructions to access the Data Review menu.
Note: If no information is stored for the desired category that was
selected, the following message will be displayed on the monitor:
“No Stored Tests”.
Note: If no tests match the criteria specified, this message will be
displayed on the monitor: “No Tests Match Request”.
If the monitor displays a message not indicated in these procedures,
please refer to the section 10, Troubleshooting.
1. Press 1 – Patient
History.
The Patient History menu
now appears.
2. Press 5 – Comment
Code.
The monitor will prompt
for the comment code to
be scanned or entered.
3. Scan or manually enter
the desired comment
code via the keypad,
then press Enter.
The monitor will show the
most recent test result for
the selected comment
code.