Filter
Top Products
64
16
24
25
13
19
22
23
2
3
5
1
20
4
28
Fig. 54␣ –␣ 55
1 Binocular phototube, 2 Eyepiece tube, 3 Eyepieces, 4 Tube mount (tube interface), 5 Tube port for photo/TV connection,
6 Beamsplitter switch, 7 Mains switch, 8 Brightness adjustment, 9 Lateral TV port, 10 Coaxial coarse and fine drive,
11 Fluorescence module, 12 ICT prism adjustment, 13 Sextuple objective nosepiece, 14 Centring buttons for incident light field
diaphragm, 15 Field diaphragm adjustment, 16 Filters, 17 Aperture diaphragm adjustment, 18 Lamphousing mount (or
mirrorhousing for two lamphousings), 19 Lamphousing, 20 Stage plate, 21 Analyser, 22 Tube lens module (Bertrand lens and
magnification changer), 23 Switch rod for lateral TV port, 24 Transmitted light illumination column, 25 Condenser, 26 Transmitted
light lamphousing, 27 Transmitted light field diaphragm, 28 SLR port, 29 Second lamphousing
Operation
n. b.:
When using acids or other aggressive
chemicals, special care should be taken.
Avoid direct contact of these substances
with optical and mechanical components.
Fig. 54␣ ␣ View from right side of microscope Fig. 55␣ ␣ View from left side of microscope
Basic setting
for transmitted light
Switching on the halogen lamp
Switch on the 12 V 100 W lamp at the mains
switch (55.7).
Adjust the brightness with the dial. The numbers
are not absolute parameters, but merely serve
for reproducible setting. The white dot on the
dial indicates the setting for approx. 3200 °K for
photography on artificial light film and for TV
microscopy.
26
18
17
29
14
15
12
9
10
11
7
8
21
6
27