Filter
Top Products
55
– Key for defining the “lower Z position”.
Pressing the key for longer than 1 sec. deletes
the threshold; another press of the key for
longer than 1 sec. sets the current Z position
as “lower threshold”.
– Key
for defining the “upper Z threshold”
(= focus position). Pressing the key for longer
than 1 sec. deletes the threshold, another
press of the key for longer than 1 sec. sets the
current Z position as “upper Z threshold”.
n. b.:
If using the microscope without the stage plate,
please note that when you replace the front
fixing screw if the stage plate, it must not be
screwed in fully. If it is screwed in too far it will
block the focus motor. The message BLK then
appears in the LC display on the front of the
microscope.
Coded IC objective prisms (option)
The objective IC prisms are arranged on a turret
underneath the objective nosepiece. To facili-
tate allocation and thus the setting of the
objective prisms to the objectives, the LC display
on the front of the microscope indicates both
the IC prism required for the objective in the
light path and the currently effective IC prism on
the turret.
The latter flashes if the combination is wrong.
!