Filter
Top Products
57
When using a Leica DM IRB microscope, the
unit must be powered by an external power unit.
The switch on the back of the unit must
therefore be at EXT, and voltage is supplied via
an ordinary 7 V plug-in-power supply.
(Mains unit: 7␣ –␣ 15 V, pole direction␣␣␣␣ ,
I = > 100 mA).
The supplied connecting cable is connected to
the MICROSCOPE socket on the control panel
and CONTROLPANEL on the microsope.
The CONTROLPANEL interface on the micro-
scope is active from Eprom version number 2.4
upwards.
Optionally, a dual footswitch, order no. 505096,
can be connected to the FOOTSWITCH socket.
Control unit*
An electronic control unit can be connected for
the remote control of individual microscope
components such as objective nosepiece and Z
drive.
It is operated with keys on the front of the
control unit.
The control unit can also be combined with a
dual footswitch.
Connecting the control unit
The connection port is on the back of the unit.
Connection port of the control unit
15V DC EXT INT
MICROSCOPE
POWER
FOOTSWITCH
-
+