Filter
Top Products
USB and Optional Ethernet Connector
Power the VX7 off before attaching a cable to any port (serial, keyboard, Ethernet/USB, etc.).
After the cable is attached to the VX7, USB devices can be hot swapped.
The VX7 Ethernet/USB connector accepts dongle cables that provide combinations of the following connections:
l an Ethernet port, via an RJ45 connector (optional)
l a USB Host port for connecting a USB device to the VX7
l a USB Client port to connect the VX7 to a USB host or hub.
Note: Ethernet is optional on the VX7. If the VX7 was not ordered with Ethernet, the Ethernet connection on the dongle cable
has no function.
Pin Signal Description
1 USB2N_A USB D-
2 - Not Connected
3 - Not Connected
4 RXP Receive +
5 RXN Receive -
6 USB2P_A USB D+
7 DGND USBPower Return
8 - Not Connected
9 RJ45_45 RJ45, Pins 4 and 5
10 RJ45_78 RJ48, Pins 7 and 8
11 5V_USB_23 USB Power, current limited
12 - Not Connected
13 - Not Connected
14 TXN Transmit -
15 TXP Transmit +
Shell CGND Chassis Ground
2-21