Filter
Top Products
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected
and disconnected. There may be audible or visual signals as paired devices re-connect with the VX7.
l The default Bluetooth setting is On.
l The VX7 cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled
(unchecked) on the Settings panel.
l Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.
l When Filtered Mode is enabled, the VX7 can pair with one Bluetooth scanner and one Bluetooth printer.
l When Filtered Mode is disabled, the VX7 can pair with up to four Bluetooth devices, with a limit of one scanner, one
printer, two HID
1
devices (one Mouse, one Keyboard), one PAN
2
device, and one DUN
3
device connected at the same
time.
l It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the VX7.
l The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the VX7 during the
pairing process.
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the VX7. The VX7 operating
system has been upgraded to the revision level required for Bluetooth client operation. An application (or API) is available that
will accept data from serial Bluetooth devices.
Bluetooth Devices
The Bluetooth Devices tab displays any device previously discovered and paired with the VX7.
1
Human Interface Device profiles used by Bluetooth keyboards, mice, pointing devices and remote monitoring devices.
2
Personal Area Networking profile. Un-modified Ethernet payloads (using BNEP) can exchange packets between Bluetooth
devices. PANU is a PAN User service that uses either the NAP or the GN service.
3
Dial-Up Networking provides access to the Internet and other dial-up services using Bluetooth technology.
3-60